MULTI PURPOSE PU FOAM -12 C

DESCRIPTION

Multi Purpose PU Foam is a single-component, moisture-curing and self-expanding PU foam especially developed for applications at temperatures of as low as -12 °C.

PROPERTIES

• High yield&stability and adequate pressure at frost temperatures.
• Excellent adhesion on most materials.
• Very good filling capacity.
• High thermal&acoustical insulation value.
• Resistant to moisture, heat, water and many chemicals.

APPLICATIONS

Mounting and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Improving thermal isolation in cooling systems.

MULTI PURPOSE PU GUN FOAM

DESCRIPTION

Multi Purpose PU Gun Foam is single-component PU foam used with an applicator gun and features higher yield, easier application and reusability. It does not contain any propellant gases which are harmful to the ozone layer.

PROPERTIES

• Excellent adhesion& filling capacity and high thermal & acoustical insulation value.
• Economical consumption thanks to precise application.
• High yield up to 45 liters depending on temperature and humidity.
• Conforms to fire class B3 according to DIN 4102-1.
• Mould-proof, water-proof and over paintable.

APPLICATIONS

• Fixing and insulating of door and window frames.
• Filling and sealing of gaps, joints and cavities.
• Filling of penetrations in walls.
• Insulating electrical outlets and water pipes.

PROFESSIONAL PU GUN FOAM -12 C

DESCRIPTION

Professional PU Gun Foam is a single-component PU foam used with an applicator gun and developed for applications in temperatures down to -12 °C.

PROPERTIES

• Can be applied at frost temperatures.
• Excellent adhesion& filling capacity and high thermal&acoustical insulation value. Economical consumption thanks to precise application.
• High yield up to 45 liters.
• Conforms to fire class B3 according to DIN 4102-1.
• Mould-proof, water-proof and over paintable.

APPLICATIONS

• Fixing and insulating of door and window frames.
• Filling and sealing of gaps, joints and cavities.
• Filling of penetrations in walls.
• Insulating electrical outlets and water pipes.

COMBO PU FOAM

DESCRIPTION

Combo PU Foam is single-component PU foam used with an applicator gun and the straw adapter features higher yield, easier application and reusability. It does not contain any propellant gases which are harmful to the ozone layer.

PROPERTIES

• Excellent adhesion& filling capacity and high thermal & acoustical insulation value.
• Economical consumption thanks to precise application.
• High yield up to 45 liters depending on temperature and humidity.
• Conforms to fire class B3 according to DIN 4102-1.
• Mould-proof, water-proof and over paintable.

APPLICATIONS

• Fixing and insulating of door and window frames.
• Filling and sealing of gaps, joints and cavities.
• Filling of penetrations in walls.
• Insulating electrical outlets and water pipes.

B1 FIRE RATED PU FOAM

DESCRIPTION

B1 Fire Rated PU Foam is a single component, moisture curing, self expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. It is designed for easy dispensing through the straw adapter included with each can.

PROPERTIES

• According to EN 1366-4 fire retardant up to 235 min – see table enclosed.
• Efficient seal against smoke and gas.
• Does not contain CFC’s and H-CFC’s.
• Excellent adhesion & filling capacity.
• Excellent mounting capacity and stability.
• High yield up to 45 liters depending on temperature and humidity.
• Excellent adhesion on most substrates (except Teflon, PE and PP).
• High filling capacity.
• High thermal & acoustical insulation value.
• After cured, it can be painted, cut, trimmed.
• No shrinkage.
• Mould and water resistant.
• Conforms to fire class B1 (DIN 4102) and according to EN 1366-4.

APPLICATIONS

All applications where fire retardant properties are required such as:
• Installation of door and window frames.
• Filling and sealing gaps, joints and cavities.
• Filling of penetrations in walls.
• Heat insulation of roof construction.
• Sealing of cable and pipe penetrations.
• Soundproofing and sealing partition walls.
• Bonding of insulation materials.
• Multi-Purpose, adhesion and fixation.

B1 FIRE RATED PU FOAM

DESCRIPTION

B1 Fire Rated PU Foam is a single component, moisture curing, self expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. PU foam used with an applicator gun and features higher yield, easier application and reusability.

PROPERTIES

• According to EN 1366-4 fire retardant up to 235 min. – see table enclosed.
• Efficient seal against smoke and gas.
• Does not contain CFC’s and H-CFC’s.
• Excellent adhesion & filling capacity.
• Excellent mounting capacity and stability.
• High yield up to 55 liters depending on temperature and humidity.
• Excellent adhesion on most substrates (except Teflon, PE and PP).
• High filling capacity.
• High thermal & acoustical insulation value.
• After cured, it can be painted, cut, trimmed.
• No shrinkage.
• Mould and water resistant.
• Conforms to fire class B1 (DIN 4102) and according to EN 1366-4.

APPLICATIONS

All applications where fire retardant properties are required such as:
• Installation of door and window frames.
• Filling and sealing gaps, joints and cavities.
• Filling of penetrations in walls.
• Heat insulation of roof construction.
• Sealing of cable and pipe penetrations.
• Soundproofing and sealing partition walls.
• Bonding of insulation materials.
• Multi-Purpose, adhesion and fixation.

B2 FIRE RATED PU FOAM

DESCRIPTION

B2 Fire Rated PU Foam is a self-extinguishable aerosol polyurethane foam for filling, sealing and bonding gaps. It is designed for easy dispensing through the straw adapter included to each can.

PROPERTIES

• Rated B2 according to DIN 4102.
• Excellent adhesion to most building materials.
• It does not contain any propellant gases that are harmful to the ozone layer.
• It can be painted after curing.
• It can be cut and sawn.

APPLICATIONS

• Fixing and insulating of door and window frames.
• Filling and sealing of gaps, joints and cavities.
• Filling of penetrations in walls.
• Insulating electrical outlets and water pipes.

B2 FIRE RATED PU GUN FOAM

DESCRIPTION

B2 Fire Rated PU Gun Foam is a self-extinguishable aerosol polyurethane foam for filling, sealing and bonding gaps. PU foam used with an applicator gun and features higher yield, easier application and reusability.

PROPERTIES

• Rated B2 according to DIN 4102.
• Excellent adhesion to most building materials.
• It does not contain any propellant gases that are harmful to the ozone layer.
• It can be painted after curing.
• It can be cut and sawn.

APPLICATIONS

• Fixing and insulating of door and window frames.
• Filling and sealing of gaps, joints and cavities.
• Filling of penetrations in walls.
• Insulating electrical outlets and water pipes.

FOAM CLEANER

DESCRIPTION

Foam Cleaner removes fresh PU foam and cleans the PU foam gun after the application. Cleans surfaces, clothes, window&door frames and prevents the foam cure in the foam gun.

PROPERTIES

• Designed specially for cleaning the foam gun.
• Cleaner has a spray valve for removing the foam from the gun adapter.
• It can be used in all positions.
• Propellant gas is not harmful to the ozone layer.

INSTRUCTIONS

Screw the can tightly onto the gun and spray through the gun. Clean the gun; when the period between two applications is more than a week, after removing the can from the gun without replacing it with a new can. Can also be used through the attached spray nozzle.

123